Commander C31 TG Snow ARGB Edition
Mid-tower case with tempered glass side panel and two preinstalled 20cm 5V ARGB front fans and one 12cm standard rear fan, supporting up to ATX MB.
Commander C31 Snow
- Dual 200MM ARGB Fans Tempered Glass
- ATX Mid-Tower Chassis
- Two Built-in 200mm 5V ARGB Front Fans
- Excellent Cooling Capability with 2-Way Radiator Mounting up to 360mm
- Built-in ARGB Switch Board for Different Lighting Modes
- Gaming Design, Mesh Front Panel
- Riser GPU Support Bracket
- Built-in Power Cover
- 4mm Tempered Glass Side Panel
- Superior Hardware Support
- Supports both ARGB Color Synchronization with ASUS, MSI, GIGABYTE, and ASRock Motherboards, and a RGB color selection button via the I/O Port
- I/O Port Supports Dual USB 3.0
Dual Built-in 200mm 5V ARGB Case Fans
Preinstalled with two 200mm 5V ARGB front fans featuring hydraulic bearing, 9 addressable LEDs and 16.8 million-color illumination to guarantee high airflow and custom system designs to show off your PC design skills.
One Click, Switching The Mode
The 5V ARGB fans can be controlled using a simple interface built into the I/O panel that cycles through 7 different lighting modes and a range of different color options.
- Wave Mode
- Flow Mode
- RGB Lighting
- Radar Mode
- Breath Mode
- Full Lighted Mode
- Single Colour
- Light Off
Long press on RGB button for 3 seconds, fans will blink twice which now are controlled by MB software, and vice versa.
Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.
Sync with Motherboard RGB Software
Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and ASRock Polychrome. It supports motherboards that have a 5V addressable RGB header, allowing you to control the lights directly from the above-mentioned software without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI and ASRock official websites.
Angular, Mesh Front Panel
Expanded from the gaming spirit of the classic Commander MS-I chassis, the uniquely design full mesh panel optimized airflow. With its modern design and high performance, it is the best choice for both gamers and enthusiasts.
Riser GPU Support Bracket
Specially designed for dual GPU placement options, Commander C Series has the support for vertical graphic card layout with dual PCI-E slots design. Integrated riser GPU support bracket not only prevents the graphic card from sagging, but also helps to reduce the weight on the motherboard PCI-E slots.
Built-in PSU Cover
Equipped with a PSU cover with a ventilated design to improve airflow and hide those unsightly cables.
Seamless Tempered Glass Panel
The tempered glass side panel of the Commander C31 is built to be more durable and scratch resistant than older acrylic panels.
Superior Hardware Support
The Commander C31 has outstanding expandability with support for a tower CPU cooler with maximum height 180mm, a dual expansion slot VGA of up to 310mm in length with reservoir, and a power supply with length of up to 200mm.
Excellent Cooling Capability
Optimized for excellent cooling capability with two 200mm 5V ARGB front fans and one 120mm standard rear fan. The case is able to house up to two 200mm, two 140mm or three 120mm front fans, up to two 140mm fans on top to allow users build a complete high-end system.
Handy I/O Ports
Dual 3.0 USB ports on top-front panel to grant direct access when needed. As well as an ARGB button for controlling 7 lighting modes of ARGB fans.
Thermaltake Commander C31 TG Snow ARGB Edition Series Mid Tower 2 x USB 3.0 Temp
Commander C31 TG Snow ARGB
1 x 4mm Tempered Glass
Exterior & Interior: White
Hidden: 3 x 3.5" or 2.5" (HDD Bracket) / 2 x 2.5" (HDD Bracket)
Slots: 7 + 2
2 x USB 3.0
1 x HD Audio
1 x RGB Switch
Standard PS2 PSU (optional)
Rear: 1 x 120 x 120 x 25 mm fan (1000RPM / 16 dBA)
Front: 2 x 200 x 200 x 30 mm ARGB fan (800RPM / 29.2 dBA)
Front: 3 x 120mm / 2 x 140mm / 2 x 200mm
Top: 2 x 120mm / 2 x 140mm
Rear: 1 x 120mm
Front: 1 x 360mm / 1 x 280mm
Top: 1 x 240mm / 1 x 280mm
Rear: 1 x 120mm
Dimension ( H x W x D )
462 x 233 x 507 mm