This document describes ValueRAM's KVR26N19S6/4 is a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard  latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. 

 

 

• Power Supply: VDD = 1.2V Typical

• VDDQ = 1.2V Typical

• VPP = 2.5V Typical

• VDDSPD = 2.2V to 3.6V

• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals

• Low-power auto self refresh (LPASR)

• Data bus inversion (DBI) for data bus

• On-die VREFDQ generation and calibration

• Single-rank

• On-board I2 serial presence-detect (SPD) EEPROM

• 8 internal banks; 2 groups of 4 banks each

• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)

• Selectable BC4 or BL8 on-the-fly (OTF)

• Fly-by topology

• Terminated control command and address bus

• PCB: Height 1.23” (31.25mm)

• RoHS Compliant and Halogen-Free

Kingston 4GB, DDR4, 2666MHz (PC4-21300), CL19, DIMM Memory

£18.00Price
  • Product Description

    Kingston 4GB, DDR4, 2666MHz (PC4-21300), CL19, DIMM Memory

    Series

    Kingston ValueRAM

    DDR Type

    DDR4

    Size

    4GB

    Speed

    2666 MHz

    Compliance

    PC4-21300

    Pins

    288-pin

    CAS Latency

    CL19

    Data Integrity Check

    Non-ECC

    Voltage

    1.2V

    Timings

    19-19-19

    Heatsink

    No

    Additional Information

    See Overview

    Package Type

    Retail

    Package Weight

    0.0225 kg

    Warranty

    Lifetime

This site was designed with the
.com
website builder. Create your website today.
Start Now