This document describes ValueRAM's KVR24N17D8/16 is a 2G x 64-bit (16GB) DDR4-2400 CL17 SDRAM (Synchronous DRAM), 2Rx8, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
 
 
	
Power Supply: VDD=1.2V Typical
	
VDDQ = 1.2V Typical
	
VPP - 2.5V Typical
	
VDDSPD=2.2V to 3.6V
	
Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
	
Low-power auto self refresh (LPASR)
	
Data bus inversion (DBI) for data bus
	
On-die VREFDQ generation and calibration
	
Dual-rank
	
On-board I2 serial presence-detect (SPD) EEPROM
	
16 internal banks; 4 groups of 4 banks each
	
Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
	
Selectable BC4 or BL8 on-the-fly (OTF)
	
Fly-by topology
	
Terminated control command and address bus
	
PCB: Height 1.23” (31.25mm)
	
RoHS Compliant and Halogen-Free