HyperX HX421C14FB/4 is a 512M x 64-bit (4GB) DDR4-2133 CL14 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Each module has been tested to run at DDR4-2133 at a low latency timing of 14-14-14 at 1.2V.
Main Features:

Power Supply: VDD=1.2V Typical
VDDQ = 1.2V Typical
VPP - 2.5V Typical
VDDSPD=2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
On-board I2 serial presence-detect (SPD) EEPROM
16 internal banks; 4 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
Height 1.230 inches (31.25mm), w/o heatsink

HyperX FURY Black 4GB (1x 4GB) 2133MHz DDR4 RAM

  • Memory Size 4096 MB
    Number of Modules 1 module(s)
    Module Size 4096 MB
    Memory Type DDR3
    Memory Speed 1600 MHz
    Memory Package DIMM
    Designation PC3-12800
    Pin Configuration 240 pins
    Bus I/O Configuration Unbuffered
    Error Correction Non ECC
    CAS Latency CL10